CARAVAN STORAGE SHADE SOLUTIONS
If you’re looking for reliable caravan storage solutions, Transportable Shade Sheds (TSS) offer Australian‑made shade structures designed to protect caravans and camper trailers from sun, weather, and long‑term exposure.
Built for real‑world conditions, our transportable shade sheds provide practical, flexible coverage with a range of widths, lengths, and heights to suit different caravan sizes and site requirements. Whether you need a simple storage solution at home or a larger setup for rural or commercial use, our systems are engineered for durability, easy installation, and long‑term performance.
Shop the best sellers online
Buy Online
Popular Caravan Shade Shed Sizes
Our most popular caravan shade shed sizes are designed to suit everything from standard caravans through to larger touring setups. With flexible length and height options, each width can be configured to match your specific caravan and site requirements.
4670W – Standard Caravan Coverage
A versatile, popular size for everyday caravan storage, offering practical coverage for standard caravans, camper trailers, and touring setups with easy access and efficient use of space.
6170W – Larger Caravans & Motorhomes
Designed for larger caravans and motorhomes, this wider configuration provides additional clearance and access space, making it ideal for higher and wider setups.
Custom Lengths & Heights Available
All caravan shade sheds can be configured with different lengths and heights, allowing you to match your caravan size, turning space, and site conditions without compromising on usability.
Not sure which size suits your caravan? Provide your caravan dimensions and we’ll recommend the most suitable configuration for your setup.
Get Advice & Pricing
Understanding
CYCLONE RATINGS
Not sure which wind rating you need? As a general guide, if you're along the QLD coastline from Bundaberg and up into parts of WA, we recommend our C2 (Cyclonic) range.
Our C1 sheds are ideal for non-cyclonic areas with moderate winds (up to 180km/h), while C2 sheds are built for stronger, cyclonic winds (up to 219km/h) with extra reinforcement and cyclone-rated fixings for added protection.
All of our Shade Sheds are available in both C1 and C2 to suit your location (Please Note: Quickshades and Canvacons are not cyclone rated).
Check your requirements
Do I need a Cyclone Rated Shade Shed?
If you live in Northern Australia, coastal regions, or high-wind areas, you may need a C2 shed. Check your local council regulations as some areas require cyclone-rated structures for compliance.
Every shade shed is designed and certified for C1 and C2 wind-rated areas. We offer four different hold down options to suit a variety of ground conditions—whether it's a concrete slab, bare earth, or a semi-permanent solution. Not sure? Our team can guide you based on your location and intended use.
Designed for Strength and Simplicity
Designed around real‑world use — delivering strength, simplicity, flexibility, and long‑term confidence.
Built for Australian Conditions
Engineered to perform reliably in harsh Australian environments, delivering long‑term structural durability.
Simple Installation
One complete kit delivery means no missing parts, fewer delays, and a straightforward installation process.
Transportable by Design
Easily relocated as site requirements change, providing flexibility without compromising performance.
Confidence Backed
Every transportable shade shed is supported by a 10‑year structural warranty.
DIY Installation Process
Our shade sheds are supplied as complete DIY kits designed for fast, straightforward installation. Each system uses a simple slip‑fit design — no welding or complex tools required.
Set Up Base Rails
Lay out your base rails and connect them using the slip‑fit system. Align and secure each section before moving forward.
Install Portal Frames
Assemble the portal frames and position them along the base rails. Check alignment and square before fixing in place.
Add Rafters & Level
Install rafters and ensure the structure is level. Optional riser kits can be used for uneven ground conditions.
Install Roofing
Fix roofing sheets in place, ensuring proper overlap and secure fastening across all frames.
Supplied as a One‑Kit Solution
All of our 3170 mm wide transportable shade sheds are supplied as one complete kit, with the frame and sheeting delivered together. This simplifies logistics and avoids the delays commonly associated with split deliveries.
This complete, one‑kit supply approach ensures reliable installation and long‑term performance in real working environments.
Get a free quote
Speak to our Expert team
Leave your details below and let us know what you’re looking for, and our team will be in touch with a free quote.
If you’re unsure on the exact size, simply provide an estimate and include the dimensions of your caravan, vehicle, or equipment — we’ll recommend the most suitable configuration for your setup.
